SELF-PROPELLED MAIZE COMBINE MS-6
The self-propelled MS-6 maize cobs harvester is designed for harvesting whole maize cobs.
Engine power 230 hp
The layout of the controls meets modern ergonomic requirements. The key operational parameters are controlled in real time. The operator is protected from noise, vibration and dust.
230KM
Engine power
Engine power
12 KM/h
Working speed
Working speed
| Engine | ||
| Model | YaMZ (stage IIIA) | |
| Maximum engine torque | RPM | 2200 |
| Nominal power | kW / hp | 170/230 |
| Tank capacity | l | 500 |
| Bunker capacity | m 3 | 10 |
| Unloading height | m | 3.25 |
| Working speed | km / h | 10 |
| Transport speed | km / h | twenty |
| Wheelbase | m | 4 |
| Wheel track: | ||
| - drag torsion (drive) | mm | 2600 ± 50 |
| - driving | mm | 2600 ± 50 |
| Dimensions of the combine with header: | ||
| - in working position: | ||
| - length | m | 10.5 |
| - width | m | 4.6 |
| - height | m | 4 |
| - in transport position: | ||
| - length | m | 19.5 |
| - width | m | 4.0 |
| - height | m | 4.0 |
| Libra | kg | 13600 |
| Heder | ||
| Dimensions of the header on a transport trolley: | ||
| - length | mm | 7870 |
| - width | mm | 2254 |
| - height | mm | 1910 |
| Working width | m | 4.2 |
| Number of rows collected | 6 | |
| Row spacing | cm | 70 ± 3.5 |
| Minimum cutting height | mm | 100 |
| Header weight | kg | 2180 |
Specific References
13 other products in the
same category
SELF-PROPELLED MOWER "PALESSE CS-200"
The use of the "PALESSE CS-200" self-propelled mower allows to effectively deal with the problem of two-stage harvesting of head grains, legumes, grains, as well as protection of grass fodder. A mower with a swath transport head (with a reach of 9.2 m) ensures mowing of plants with central swath laying to the left or right, it can also create a double swath up to 4 m wide from two passes.
Engine power 210 hp
For mowing grass, in addition to the header, it is possible to work with a 4 m wide rowless double-drum header.
Combine harvester GS12A-1
The GS12A-1 combine harvester is a further development of the popular GS12 combine harvester at a higher technical level with an improved design.
330 horsepower
The design of the incline conveyor was changed, dust extraction was installed, "IVIS" chains were also used and a 4-row belt drive was installed. In this way, we increased the reliability of the technical process and guaranteed the comfort of the machine operator.
PALESSE FS60 harvester
PALESSE FS60 has become known as an inexpensive model for wide use. The harvester can supply silage, haylage and green forage. For greater stability, the safety system of the feeder unit is included in the basic configuration.
Engine power 255 hp
When a metal or stone detector triggers an alarm, the automatic control immediately turns off the rollers and prevents them from breaking.
PALESSE GS16 - the top model in the Palesse series.
Double drum threshing system with faster grain mass flow for thorough threshing and high productivity. Separation takes place by means of two rotors. This rotary separation scheme is best suited for farms that simultaneously harvest large amounts of grain and maize for grain.
530 horsepower
The high level of automation of working processes eliminates operator errors and ensures stable operation of the combine in changing harvesting conditions. The spacious cab of the new unified series provides the operator with all conditions without stress and fatigue during a long shift.
Capacity - 16 kg / s
HIGH CAPACITY "PALESSE FS8060"
The PALESSE FS8060 forage harvester is a powerful harvester for large agricultural enterprises focused on a high level of animal husbandry development. Well-designed structure, parts and components manufactured on advanced equipment, components from the best suppliers are the basis for the maximum performance of the combine in various operations
Engine power - 632 hp
The six intake rollers are the three stages of pre-compacting the sand for high-quality and energy-efficient cutting.
Combine harvester GS10
PALESSE GS10 is the middle class higher in the range of combine harvesters.
250 horsepower
A threshing machine with a width of 1500 mm with one large drum, a straw shaker with five buttons and a three-stage cleaning system - thanks to these solutions and careful selection of the engine, they will certainly show effective work with a wide range of performance. The quality of harvesting operations is supported by a high level of automatic control.
Combine harvester GS12
PALESSE GS12 - a high-performance combine harvester with a width of 1500 mm of the threshing device, in which the acceleration of the grain mass flow before threshing was applied.
330 horsepower
The efficiency of the combine is increased by the use of additional adapters for harvesting various crops.
Depending on the market, the combine can be equipped with engines from different manufacturers.
HIGH CAPACITY PALESSE FS80
PALESSE FS80 is used in medium and large farms. Modern solutions guarantee the availability of high power and low operating costs.
Engine power 470 hp
The adapters have been designed for high efficiency and high-quality cutting: the header feeds the corn stalks exactly in the direction of the longitudinal axis of the feeding apparatus, and the pick-up, thanks to its design, ensures the shortest path of the collected mass to the rollers.
PALESSE GS812 - a classic single-drum, middle-class...
Reliable technological scheme and low operating costs make PALESSE GS812 the optimal solution for farms with low and medium grain yield.
230 horsepower
The modification of the GS812 differs depending on the undercarriage with tracks, which allow effective use on soils with low bearing capacity. The combine can be equipped with straw walkers. Depending on the market, the combine can be equipped with engines from different manufacturers.
Combine harvester GS575
PALESSE GS575 - an "economy class" combine harvester for small and medium-sized enterprises that require agile and agile technology.
155 horsepower
The classic 1200 mm wide thresher with a large drum is reliable. Stable separation and high grain quality are ensured by the four-arm straw walker and three-stage cleaning.
A simple cabin with analog devices that display data from an automatic control system provides quite suitable working conditions. These are seats for increased comfort, air conditioning, a good overview of the header work area.
In addition to adapters with a coverage width of 4 and 5 meters, the combine has been modified, which can be equipped with a 6-meter header for soybean and cereal cultivation. Possibility to mount motors of different power.
The self-propelled MS-6 maize cobs harvester is designed for harvesting whole maize cobs.
Engine power 230 hp
The layout of the controls meets modern ergonomic requirements. The key operational parameters are controlled in real time. The operator is protected from noise, vibration and dust.